- + 2
- 4,535 views
- Added over 3 years ago
How To Install a Bandsaw Riser Block
For less than $100 and about 30 minutes of your time, you can increase your bandsaw’s resawing capacity by 6". WOOD Magazine Design Editor Jeff Mertz shows you how.
- + 6
- 7,960 views
- Added over 3 years ago
How To Apply Iron-on Edge Banding
We love to build with plywood because it's dimensionally stable and available anywhere. WOOD Magazine Senior Design Editor Kevin Boyle shows you how to apply iron-on edge banding to hide plywood's ugly edges.
- + 4
- 6,693 views
- Added over 3 years ago
How To Lay Out an Ellipse
With a framing square and simple shop-made trammel, Senior Design Editor Kevin Boyle shows you how to lay out a flawless ellipse, such as the one that defines the curve of the bow-front table project in WOOD magazine issue 172…
- + 6
- 2,140 views
- Added over 3 years ago
How To Make a Woodturned Screwdriver, Part 2
In the second part of this useful woodturning project, WOOD Magazine turning expert Brian Simmons, shows how to turn the handle to final shape, apply finish, and install the hardware (Part 2 of 2)
- + 9
- 4,082 views
- Added over 3 years ago
How To Make a Woodturned Screwdriver, Part 1
Here's a turned project you'll use everyday. WOOD Magazine woodturning expert Brian Simmons shows you how to rough out the handle shape, bore the hardware hole, and install the ferrule. (Part 1 of 2)
- + 10
- 5,559 views
- Added over 3 years ago
How To Proportion Projects Pleasing To the Eye
WOOD Magazine Design Editor Jeff Mertz shows you how to use a Fibonacci Gauge to proportion projects that are pleasing to the eye. Visit http://woodstore.net/figaandhowto.html to find plans for making your own Fibonacci gauge along with instructions on how to…
- + 3
- 7,819 views
- Added over 3 years ago
How To Quickly Sharpen Your Hand Tools
WOOD Magazine Design Editor Jeff Mertz shows you how to put a razor-sharp edge on your chisels and plane irons using self-stick sandpaper, and a grinder equipped with a stone and buffing wheel. You'll be amazed at the speed and…
- + 24
- 116,809 views
- Added over 3 years ago
How To Cut Crown Molding
You don't need a slide rule, an eagle eye, or a compound mitersaw to make dead-on cuts in crown molding. WOOD Magazine Tools Editor Bob Hunter demonstrates an intuitive technique that lets anyone cut crown molding easily and accurately.
- + 3
- 3,547 views
- Added over 3 years ago
How To Use a Mitersaw
WOOD Magazine Tools Editor Bob Hunter shows you the different kinds of mitersaws you can buy, as well as some safety tips, and tricks for super-accurate cutting.