Up next in Easy Sewing Projects (45 videos)
All you need is a needle, thread, some fabric, and these step by step instructions to start sewing.
You Will Need
- An old T-shirt
- Measuring tape
- About five feet of sewing elastic
- A safety pin
- A needle and thread or a sewing machine
- Straight pins
Choose a T-shirt
Select a T-shirt, bearing in mind that if you use a shirt with writing or a design, it will end up upside-down on your new blouse.
Prepare the elastic
Measure the circumference of the area just above your breasts, and cut a piece of elastic in that length.
Cut an opening
Turn the tee inside out, and snip a small vertical opening on the bottom hem.
Insert the elastic
Attach a safety pin to one end of the elastic, insert the pin through the opening you’ve just made, and push the pin through the inside of the hem until it reaches the other side.
Attach the ends
Bunch the material over the elastic a bit, sew the two ends of the elastic together, and turn the shirt right side out.
Cut the top
Use straight pins to pin together the front and back of the shirt in a straight line from shoulder to shoulder, and cut off the material along that line; then hem the top of the shirt by hand or machine.
Sew the sleeves shut
Turn the shirt inside out again; fold the sleeves over the front of the shirt; sew the sleeves closed along the seam of the hem; then turn the shirt right side out.
Slit a sleeve
Cut a small, vertical slit into the hem at each end of one of the sleeves.
Insert the elastic
Cut a piece of elastic that is a bit shorter than the width of the sleeve; snake the elastic through the top side of the sleeve’s hem with a safety pin, scrunching up the fabric a bit; then sew the elastic to the fabric and sew up the slits.
Sew the sleeves to the shirt
Sew the sides of the sleeve to the shirt, making a nifty outside pocket.
Repeat with the other sleeve.
Show off the sassy little sleeveless number you’ve just made!