Up next in Duct Tape Crafts (8 videos)
Got a roll of duct tape? Then you've got hours of arts and crafts fun ahead of you with the duct tape crafts in this Howcast video series.
You Will Need
- Duct tape
- Utility knife
- Craft foam (optional)
Make two sheets of tape
Cut off several strips of tape, 12 inches long, with the scissors. Overlap the strips by a half-inch to make a square sheet of duct tape. Repeat the steps to make a second sheet.
Overlap the sheets
Flip and cover the sticky sides with another layer of overlapping tape strips. Make sure no sticky side is visible when you're finished.
Trace your feet
Trace the outline of your foot with the marker to create the base of your shoe and repeat with the other foot. Cut out the patterns with your utility knife.
Make the toe straps
Cut a foot-long piece of duct tape and fold the strip in half lengthwise. Then cut the same strip in half lengthwise to make two thin, 12-inch strips. Then repeat to make two more strips for the other flip-flop.
Position the straps
Mark the point on the sole between your big toe and second toe. Cut a horizontal slit along the dot, ¾ of an inch long. Slip the ends of two of the straps through the slit and tape the ends to on the bottom. Repeat with the other shoe.
Attach the straps
Place your foot on the sole and pull one strap over your foot at an angle to the left, and one to the right, and then tape the ends to onto the bottom. Do this for both shoes. Now you can go to the beach in style!