How to Put Gas in an Airsoft Gun

Learn how to put gas in an airsoft gun in this Howcast video featuring airsoft experts Payton Kemper and Josh Meyer.

Transcript

Hi, my name is Payton. I'm the manager of Airsoft Hero located in the historic district of Hampden in Baltimore, Maryland. And I'm Joshua Meyer. I'm the tech here at Airsoft Hero. Our store features AEGs, accessories, apparel. We also buy used guns, accessories and apparel and we also do quality tech work. Any details you can find on our website at www.airsofthero.com. And we'll be talking to you about airsoft. Loading your gas gun depends on what kind of gas gun you have. If you have a CO2 gas gun, you're gonna use the small CO2 tanks. IF you have a green gas gun, you're gonna use the airsoft green gas. Now to load your green gas gun, you're gonna take the magazine, you're gonna take your green gas bottle. You're gonna insert it into the bottom, and when you charge it, you wanna charge it for no more than about three seconds at a time. Three second bursts, and to fill up the magazine all the way it takes around four to five three second bursts. Now that this magazine is charged, I'm gonna load some BBs inside, and after that, insert the mag, put the slide forward, and you're ready to shoot.

For CO2 guns, some of the CO2 magazines will have a cover, some of them will not. You need to take the cover off, and then the gun will provide an allen key. You're gonna use that allen key, and take out the screw inside. And you're gonna insert the CO2 so the top is to the top of the magazine. After that's in, you're gonna put the screw back on, take the allen key, and tighten it up. Now as you're tightening it up, you're gonna feel it get a little tight. After that you need to turn it a little bit faster, and you're gonna hear the CO2 feed into the magazine. After that, load your BBs, insert the magazine, send the slide forward, and you're ready to go.

Popular Categories