How to Assemble a Walther PPK .380

Learn how to assemble a Walther PPK .380 from Police Officer Keith Charley in this Howcast gun video.

Transcript

Today we're going to talk about how to assemble the Walter PPK 380 pistol.

The first thing you need to do is you take your pistol and you want to put the spring back onto the barrel. Just slides right over into place.

From there you need to put the slide back on. You're going to insert the barrel into the slide and draw it back. You got to bring it back far enough to get the slots into place. This gun takes a little bit of strength to do it. Great.

As you draw it back you want to pull down on the trigger guard and the back of the slide will slide into place and then you can release it and let it go.

Once that's in place you rack it back and forth and pull the trigger to make sure the gun works. I like to do it twice just to make sure there's no problems.

And all you have to do is reinsert the magazine and the gun is fully assembled.

That is how to reassemble the Walter PPK 380 pistol.

Popular Categories